Ride Berzerker Snowboard

The Berserker is designed by one of the world’s smoothest snowboarders, Jake Blauvelt.
Jake wanted a board that matched is smooth and effortless style in all terrain conditions. You'll be impressed at how smooth the transition from edge to edge is in any condition. The tip rocker and a small amount of taper in the tail improve edge-to-edge speed and float in powder. The Tapered Quadratic Sidecut has been enhanced to improve stability and edge hold. Carbon Slimerods® 2.0 have carbon for pop and a slime-core to smooth out the landings. The Berzerker is built for an all-mountain rider looking for performance in all conditions. Like a Viking longship, the Berzerker is designed to sail in the shallows or the deep, cut through ice, and take you to snowboard Valhalla. Pay attention to the waist width, the standard sizes run a bit narrow optimized for a smaller boot, the wide sizes are more mid wide providing a good option for the size 11, 12 or 13 boots out there. If you've got a bigger foot or prefer a wider ride, check out the Algorythm.
Snowboard Category All Mountain , Powder
Shape - Directional Hybrid Camber
A directional shape with a hybrid profile that has more camber than rocker.
Quadratic Sidecut
Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.
Carbon Slimerods®
RIDE’s Slimerods® give already fun and playful boards the added liveliness to set them apart from other boards. Using strategic placement in the boards tip and/or tail, this technology adds pop without the stiffness generally associated with snappy boards. Made up of flat carbon rods that wrap a urethane slime-core, Slimerods® have carbon for massive pop and a slime-core to smooth out the landing. Available in 2 levels: Slimerods® 1.0 & 2.0.
Slimewalls®
RIDE’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® smoothes the interaction with the snow, wood or metal surfaces you may ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding.
Roll-In Construction
Unique 3D structure built around our urethane Slimewall® sidewalls. Designed to increase overall board strength, prevent topsheet chipping, and reduce weight.
Hybrid Glass
Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.
Impact Plates Carbon Array 3™
Laminates
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.
Carbon Array Laminates
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.
Performance™ Core
High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Stone Finish Sintered Base
High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded. SIZE EFF-EDGE WAIST WIDTH SIDECUT RADIUS TIP & TAIL WIDTH SET BACK REF STANCE RIDER WEIGHT (CM) (MM) (MM) (MM) (MM) (MM) (MM) (LBS / KG) 153 1152 245 4.37 7.6 3.8 296 / 288 -19 533 100-150 / 45-69 156 1177 247 4.65 7.8 4.07 298 / 290 -19 559 125-175 / 57-80 159 1203 249 5.14 8 4.6 300 / 292 -19 559 130-180 / 59-82 162 1228 251 5.66 8.2 5.16 302 / 294 -19 559 140-190 / 64-86 165 1254 253 6.2 8.4 5.76 304 / 296 -19 559 160-210 / 73-95 160W 1203 257 5.14 8 4.6 308 / 300 -19 559 150-220+ / 68-100+ 163W 1228 259 5.66 8.2 5.16 310 / 302 -19 559 160-220+ / 73-100+ 167W 1253 261 6.81 8.4 6.53 312 / 304 -19 584 170-220+ / 77-100+